Precision is essential for woodworking safety and accuracy. The table saw fence is one of the most important pieces of equipment to ensure both precision and safety. The table saw fence is made of metal and runs along the saw blade. It allows the blade to work smoothly.
Looking for general information about table saws and other tools? Our complete resource guide on Miter Saws, Table Saws, Chainsaws, Band Saws, and Circular Saws is available. These guides contain all the information that you need. These guides will provide you with history, information on the different types of the tool and top brands sold.
Table Saw Fence Reviews
There are many brands of table saw fences. It is possible to buy a table saw fence from a popular brand (such as Craftsman) and then upgrade it later with a fence from another brand to enhance its functionality.
Incra Table Saw Fence
Since 1987, Incra is a trusted name in power tools accessories and power tools. The table saw fence is made of a strong structural design and has an automatic position control that allows for positioning manipulation within 0.002 inches.
What Do We Like
- Large micro-adjustable knob: This knob has a resolution of 0.0025mm for better accuracy and repeatability during cutting.
- Precision and accuracy: Measurement and cutting precision is not only important for the appearance of a finished product, but also for structural integrity.
- Simple setup: This table saw fence installation is easy compared to other fence models. Even a novice carpenter should not have any problems.
What We Do Not Like
- Space hog: The fence takes up much of the workshop’s space, measuring 305cm at its highest adjustment.
- Medium-range durability/rigidity Not as good as a T square fence.
- Removal can be a hassle. Although installing a fence is usually not a problem, it can be difficult to take it down again.
Delta Table Saw Fence
One of the most well-known table saw fences is the Delta Table Saw Fence. Also known as a Biesemeyer Fence. This fence is often used to upgrade different types of table saws. It is not limited to the Delta system.
What Do We Like
- Superior locking capabilities: This fence has the best locking system in the country.
- The instructions for setting up the fence are simple:
- Easy-grip Handle: This table saw will not slip during a cut. It is held in place by a magnet when in use.
- Longevity Many older versions of this fence system still work today, many decades after their design. This is a testament to their quality and durability.
What We Do Not Like
- Chinese manufacturing has harmed the brand. Delta moved its manufacturing to China. Many customers claim that this has had a serious impact on their shipping quality as well as the overall quality of their products.
- Repair can be a pain: Replacement parts are not always easy to find for the Delta fence. If your fence breaks, you might have to purchase a new one. Many machinist techs don’t want to fix them because they are difficult to find.
- There are no local parts available: This brand is not sold in many retail outlets due to a shortage of spare parts and replacement parts.
Craftsman Table Saw Fence
Craftsman Table Saws are a well-known mid-line tablesaw. The standard stock fence included with the complete table saw assembly is good. Many woodworkers choose to replace it or upgrade it.
What Do We Like
- Quick release: This cuts down on the time it takes to adjust the fence positioning.
- Locking mechanism The standard locking mechanism on the Craftsman tablesaw is sufficient. That’s all we can say about it.
What We Do Not Like
- A very basic model: The stock Craftsman Fence doesn’t have many of the bells or whistles that other aftermarket fences do.
- Limitations on size: It is difficult to use larger pieces of the table saw because of the small size and reduced rip capacity.
For minor woodworking projects, the stock Craftsman fence will suffice. Many woodworkers who use Craftsman tablesaws end up upgrading their fences to have a greater rip capacity. The standard fence on this table saw is considered a little too small.
These are some of our most popular fence upgrades for Craftsman tablesaws:
- Shark Guard: Shark Guard is a popular fence product that Craftsman tablesaws use. They can also be used on many other table saws. The best thing about the Shark Guard is the ability to customize a guard for you if there aren’t any available.
- SawStop: Sawstop produces top-quality safety accessories for woodworking. The fence system can be used to replace the stock fence on Craftsman tablesaw systems. The Sawstop is compatible with many routing accessories.
- A Precision Alignment & Locking System (PALS), if you require absolute rigidity and precision when performing your cuts, then a PALS could be a good option. This model fits Craftsman tablesaws.
DIY Table Saw Fences
Building your own table saw fence is cheaper than buying one. It can be customized to suit your woodshop’s needs.
You will be responsible for ensuring that the table saw fence aligns correctly and locks securely. For a quality product, precise measurements and assembly will be required.
What Is A Table Saw Fence System And How Do You Use It?
One of the most important features of a tablesaw is its fence system. Because they enable woodworkers make precise and repeatable cuts,
This means that the fence is responsible to ensure that each cut is exactly the same. This improves the aesthetic quality and beauty of the woodwork.
They are not only useful for improving the quality of the carpentry that they support, but also because they can be used to prevent accidents. They are also important for safety. They prevent kickbacks from your saw. Kickback occurs when the saw does not cut smoothly.
Table saw fences of high quality combine precision adjustment and a square and true bar. It is important to be able to position the table saw easily. A fence attached to the table saw will make it easy to transport. You should also consider the maximum ripping ability for large wood pieces when upgrading a fence on a table saw.
Final Thoughts On Table Saw Fences
A table saw fence is essential for safety in a woodworking shop. Out of all the fences available, I would choose an Incra tablesaw fence. Because of its strength and rigidity, it is my choice. The second option is to build my own.
No matter which table saw fence you choose, make sure to carefully read the reviews of customers before making a decision. You will often learn a lot from them about a product they haven’t.
